Description
Sorane TA-1 and TA-1L Tonearms
The major key to tonearm quality is the sensitivity and stability in retrieving delicate signals, for which the bearings are the determining factor. The TA-1 employs a miniature radial bearing for horizontal movement and a miniature pivot bearing for vertical movement. Very high performance is achieved at a reasonable price. * The body is constructed from a machine-tooled solid aluminum block. * The hand-assembled arm wand satisfies every vital condition necessary for vibration-free and noise-free reproduction. * Reproduced sound is precise and clean, thanks to hand assembly by highly skilled craftsmen. * Comes with detachable headshell, phono cable (RCA output plug, or optionally as XLR), screws, washers, wrench and marking pin.
TA-1:
- Whole Length: 288 mm
- Effective Length (Tonearm pivot – stylus): 232 mm
- Practical Length (Tonearm pivot – Spindle): 216 mm
- Overhang: 12mm
- Offset angle: 16.5°
- Horizontal moving sensitivity: 30mg
- Vertical moving sensitivity: 20mg
- Vertical Tracking Force (VTF) range: 0 – 3 g
- Cartridge + Headshell weight range: 15 – 29 g ( 30g* Option)
- Height Adjustment (Plinth to arm wand centerline): 15 – 55 mm
- Vertical Bearing: Pivot miniature bearing (Not Pivot Contact)
- Horizontal Bearing: Miniature Radial Bearing
- Output plug: RCA (XLR : Option)
- Output cable: Single core shielded copper
- Tonearm Audio Lead wire: OFC 4N Copper
- Headshell lead wire: Copper with gold plated terminals
- Headshell: Machine tooled Aluminum
- Tonearm Net Weight: 580 g
- Attached standard Headshell Net Weight: 17 g
TA-1L:
Whole Length | 380mm |
Effective Length (Tonearm pivot – stylus) | 322mm |
Practical Length (Tonearm pivot – Spindle) | 310mm |
Overhang | 12mm |
Offset angle | 16.5° |
Horizontal moving sensitivity | 30mg |
Vertical moving sensitivity | 20mg |
Vertical Tracking Force (VTF) range | 0 – 5g |
Cartridge + Headshell weight range | 15 – 24g ( 30g* Option) |
Height Adjustment(Plinth to arm wand centerline) | 15 – 55mm |
Vertical Bearing | Pivot miniature bearing (Not Pivot Contact) |
Horizontal Bearing | Miniature Radial Bearing |
Output plug | RCA (XLR : Option) |
Output cable | Single core shielded copper |
Tonearm Audio Lead wire | OFC 4N Copper |
Headshell lead wire | Copper with gold plated terminals |
Headshell | Machine tooled Aluminum |
Tonearm Net Weight | 610g |
Attached standard Headshell Net Weight | 17g |