Description
Yamaha M5000 Amplifier
Yamaha does not permit this product to be ordered via an online shopping cart. Please contact us by phone or email for more information or to order. Thank you very much.
- 200 W + 200 W (4 ohm, 20 Hz-20 kHz, 0.07% THD, 2-ch driven)
- 100 W + 100 W (8 ohm, 20 Hz-20 kHz, 0.07% THD, 2-ch driven)
- Meticulously designed, balanced signal transmission
- Floating and balanced power amplifier layout for improved drivability
- Perfectly symmetrical design for isolating left and right channels
- Low impedance design with shortened signal and power supply paths
- Improved construction delivers state-of-the-art rigidity
- Massive toroidal core power transformer
The power supply of the M-5000 is connected directly to each positive and negative side of the output stage.
Delivering high-fidelity performance, a massive toroidal transformer is utilised with a 3 mm thick pure brass base which suppresses unwanted vibrations.
Thick wires and screw-type connections contribute to the low-impedance design of the M-5000 – minimizing energy loss that would otherwise typically occur in conventional connections and wire assemblies.
The 3 mm thick terminal base plate is also made from pure brass for strength and rigidity, and assists in reducing distortion due to its non-magnetic properties.
SPECIFICATIONS:
M-5000 | ||
---|---|---|
Audio Specifications | Input Terminal | RCA: 1, BAL: 1, TRIGGER IN: 1 |
Output Terminal | TRIGGER OUT: 1 | |
Rated Output Power | 100 W + 100 W (8 ohm, 20 Hz-20 kHz, 0.07% THD, 2-ch driven), 200 W + 200 W (4 ohm, 20 Hz-20 kHz, 0.07% THD, 2-ch driven), 400 W (8 ohm, 20 Hz-20 kHz, 0.07% THD, Monaural driven) | |
Dynamic Power Per Channel | [IHF] 125 W + 125 W (8 ohm), 170 W + 170 W (6 ohm), 250 W + 250 W (4 ohm), 500 W + 500 W (2 ohm) | |
Dynamic Headroom | 0.97 dB (8 ohm) | |
Maximum Output Power | 220 W + 220 W (4 ohm, 1 kHz, 0.7% THD) | |
IEC Output Power | 125 W + 125 W (8 ohm, 1 kHz, 0.02% THD) | |
Maximum Effective Output Power | [JEITA, 1kHz, 10% THD]135 W + 135 W (8 ohm), 270 W + 270 W (4 ohm) | |
Power Bandwidth | 10 Hz-50 kHz (8 ohm, 0.1% THD, 45 W) | |
Damping Factor | 300 or higher (8 ohm, 1 kHz) | |
Input Sensitivity / Input Impedance | (BAL) 2.0 Vrms / 47 kohm, (LINE) 1.0 Vrms / 47 kohm [1 kHz 100 W / 8 ohm conversion] | |
Maximum Input Signal Voltage | (BAL) 2.20 Vrms [1 kHz, 0.5% THD], (LINE) 1.10 Vrms [1 kHz, 0.5% THD] | |
Frequency Response | +0 dB / -3 dB (5 Hz-100 kHz), +0 dB / -0.3 dB (20 Hz-20 kHz) | |
Total Harmonic Distortion Plus Noise | 2ch driven: 0.035% (LINE [BAL] to SP Out, 20 Hz-20 kHz, 50 W, 8 ohms), Monaural driven: 0.05% (LINE [BAL] to SP Out, 20 Hz-20 kHz, 200 W, 8 ohms) | |
Channnel Separation | 90 dB or higher (1 kHz, Input 1.0 kohm Terminated), 70 dB or higher (10 kHz, Input 1.0 kohm Terminated) | |
Signal-to-Noise Ratio | [IHF-A network, Input 1 kohm shorted] 110 dB | |
Residual Noise | [IHF-A network] (BAL) 40 uVrms, (LINE) 50 uVrms | |
Meter Class | The 2.5th class | |
General | Power Consumption | 400 W |
Standby Power Consumption | Off Mode: 0.1 W, Standby Mode: 0.2 W | |
Maximum Power Consumption | 800 W | |
Power Management (Auto Power Standby) | Yes | |
Dimension (W×H×D) | 435 x 180 x 464 mm; 17-1/8” x 7-1/8” x 18-1/4” | |
Weight | 26.9 kg; 59.3 lbs. |